Recurring leaks in the same spot
We tear off the old roof, find the actual source (usually failed flashing or a cracked pipe boot), and install new flashing, underlayment, and roofing. The leak source is gone, not covered up.
Roof installation in New York means building a roof that handles nor'easters, lake-effect snow, and 95-degree summer sun. Roofnexa NY has installed and replaced roofs across the state since 2014, from Long Island split-levels to Buffalo two-families. We tear off the old system, fix the deck, and install new roofing with manufacturer-backed warranties. Free estimates, no subs, and a crew that cleans up like it was never there.
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now (315) 503-7248 → No spam. No obligation. Just practical help.
Roof installation in New York is the full process of removing your existing roof covering, inspecting and repairing the deck, and installing a new roof system from the deck up. That means ice and water shield along the eaves, synthetic underlayment across the field, new flashing at chimneys and walls, and a finished surface of asphalt shingles, metal roofing panels, or tile. We set every course with a chalk line, fasten with a roofing nail gun to manufacturer spec, and seal penetrations with fresh boots and pipe collars.
New York roofs take a beating. Ice dams form along the eaves in January, hail hits the Hudson Valley in spring, and coastal wind drives rain sideways into flashing on Long Island. If your roof is 20-plus years old, has curling shingles, or has leaked twice in the same spot, patching is throwing money at a losing battle. A new roof installation New York homeowners can count on starts with a proper tear-off, not a layover. We install new roof systems for new construction, full replacements, and storm-damaged homes across the state.
Every Roofnexa NY install covers the full roof system, not just the shingles. Here is what you get in a standard install. Items like gutter replacement, skylight replacement, and chimney rebuilds are quoted separately because not every home needs them.
We strip the old roof down to the deck, remove every nail and shingle, and haul it all away. Dumpster, disposal fees, and cleanup are in the price. No hidden debris charges at the end of the job.
We walk the sheathing for soft spots, delamination, and water damage. Rotted decking gets replaced before we install anything on top. Your estimate includes a repair allowance, and we show you photos of any decking we replace.
New York roofs need ice and water shield along the eaves, in valleys, and around penetrations. We install a minimum of 6 feet up from the eave, which is what stops ice dams from pushing water under your shingles in January.
Synthetic underlayment goes across the entire roof deck. New flashing goes at chimneys, sidewalls, headwalls, and valleys. We replace pipe boots and step flashing, not reuse them. Old flashing is the number one cause of leaks on a new roof.
We calculate intake and exhaust ventilation for your attic and install ridge vents and intake vents to match. Balanced ventilation keeps the attic cooler, reduces ice dams, and protects your manufacturer warranty.
We register your manufacturer warranty the day we finish and hand you the paperwork along with our workmanship coverage. If a problem shows up in the first year, you call us and we come back. No runaround.
We walk the roof, check the attic, and photograph every problem area. You get a written scope with material options, ventilation math, and a fixed price. No pressure, no same-day-only discounts. Most inspections take 45-60 minutes.
You pick the shingle line, color, and any upgrades like ridge vents or upgraded underlayment. We bring samples so you can see them against your siding. Most homeowners pick architectural asphalt shingles in the $6.50-$9.50 per square foot installed range.
Crews strip the old roof down to the deck, haul away every shingle, and inspect the sheathing. Rotted or delaminated decking gets replaced on the spot. We tarp the roof at the end of each day so your house is never open to the weather.
We install ice and water shield, underlayment, flashing, drip edge, and the finished roofing. A typical 1,800-square-foot ranch takes 2-3 days. Steeper roofs, multiple layers of tear-off, or slate work add time. We run magnetic sweeps for nails twice before we leave.
You walk the finished roof with the crew lead. We hand over the manufacturer warranty, our workmanship coverage, and photos of the completed install. If anything looks off in the first year, we come back and fix it, no charge.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Drives roofing nails to the exact depth and pattern the manufacturer specifies. Hand-nailing is slower and inconsistent. We use pneumatic nailers calibrated to each shingle line.
Strips old shingles, underlayment, and nails without damaging the deck. Clean tear-off is the first step to a flat, nail-free surface for the new roof.
Snaps straight reference lines across the deck so every course of shingles runs true. Crooked courses are visible from the street and cause alignment problems at ridges and valleys.
Safe access and fall protection on steep pitches. Our crews are OSHA-certified and harnessed on every roof that requires it.
Seals flashing edges, pipe boots, and penetrations with roofing sealant. The utility knife cuts shingles, underlayment, and ice and water shield to fit around chimneys and vents.
Fastens step flashing, drip edge, and vent components. We also use it to set pipe boot collars and ridge vent sections.
Original three-tab shingles, curling and losing granules. Two active leaks near the chimney. Attic insulation soaked in two spots. Homeowner had paid for three patch repairs over four years, all in the same area.
Full tear-off, replaced four sheets of rotted decking, new ice and water shield, new Owens Corning architectural shingles, new chimney flashing. Install took three days. No leaks through two storm seasons since.
Ice dams formed every January along the north eave. Water backed under the shingles and stained the ceiling in two bedrooms. Attic had no ridge vent and only two small gable vents, so heat and moisture built up all winter.
New roof with 6 feet of ice and water shield at the eave, ridge vent installed, intake vents added at the soffits. Ceiling stains repaired. No ice dams the following winter, and the attic stays noticeably cooler in summer.
Wind storm tore shingles off the west slope and exposed underlayment. Insurance approved a full replacement after inspection. Roof was 18 years old with matching wear on all slopes.
Full tear-off and new GAF Timberline shingles in a color matched to the home. New drip edge, new ridge vent, new pipe boots. Install took two and a half days. Insurance covered the replacement minus deductible.
Most roofs we replace are failing for one of a handful of reasons. Here is what we see on New York roofs and how a new install fixes it for good.
Ask a pro →We tear off the old roof, find the actual source (usually failed flashing or a cracked pipe boot), and install new flashing, underlayment, and roofing. The leak source is gone, not covered up.
A full tear-off and new shingle install resets the clock. We install architectural shingles rated for New York wind zones with proper nailing patterns and starter strips at the eaves and rakes.
We install ice and water shield at the eaves and valleys and fix attic ventilation so the roof deck stays cold. That combination stops ice dams from forming in the first place.
We document damage with photos, provide a written scope for your claim, and install a code-compliant new roof. We work with adjusters and can meet them on site.
“We had two leaks in the same spot for three years. Roofnexa tore off the old roof, found rotted decking near the chimney, replaced it, and installed new Owens Corning shingles. Three days start to finish. They swept the yard twice for nails and my dog never found one. First heavy rain after the install, no drips.”
Dan R.Homeowner, Levittown
✓ Verified“Got four bids for a new roof. Roofnexa was not the cheapest but they were the only ones who measured my attic ventilation and showed me why it mattered. Install took two and a half days. My upstairs is noticeably cooler this summer. Worth every dollar.”
Maria T.Homeowner, Poughkeepsie
✓ Verified“I manage six rental properties and needed a roofer who could handle multiple installs without babysitting. Roofnexa replaced roofs on two of my buildings last fall. Clean work, proper ice and water shield at the eaves, and they handled the permit paperwork. I have them on speed dial now.”
Kevin S.Property Manager, Tonawanda
✓ VerifiedMost asphalt shingle roof installs in New York run $9,000 to $22,000 for a typical single-family home, or roughly $6.50 to $12 per square foot installed. Metal roofing runs $14 to $24 per square foot, and slate can exceed $30. Steep pitches, multiple tear-off layers, and complex roof geometry push the number up. We give you a fixed written price after the inspection, so you know the total before we start.
A standard 1,800 to 2,400 square foot asphalt roof takes 2 to 4 days from tear-off to final cleanup. Larger homes, steep pitches, or slate and tile installs run 5 to 10 days. Weather is the main variable: we do not install shingles in freezing rain or high wind. We tarp the deck at the end of every workday so your home stays dry if a storm rolls through overnight.
Licensed home improvement contractors with roofing crews do. Roofnexa NY has been installing roofs since 2014 and holds GAF Master Elite and Owens Corning Preferred Contractor credentials. We are OSHA-certified, insured, and bonded. Ask any contractor for their license, insurance certificate, and manufacturer credentials before you sign. If they cannot produce all three, keep calling.
A complete install includes tear-off and disposal of the old roof, deck inspection and repair, ice and water shield at the eaves and valleys, synthetic underlayment, new flashing at chimneys and walls, drip edge, ridge and intake ventilation, and the finished roofing material. We also run magnetic nail sweeps, haul away all debris, and register your manufacturer warranty. Gutters and skylights are quoted separately if you want them replaced at the same time.
Roofnexa NY delivers roof installation services New York homeowners can schedule from Long Island to the Southern Tier to Western New York. Regional crews know the local building departments, snow-load requirements, and coastal wind zones. Here are some of the cities we serve across the state.
Call (315) 503-7248 and we will schedule a free inspection at your home. You get a written scope, material samples, and a fixed price. Licensed, insured, and warrantied. 12 years installing roofs across New York.
Get Free Estimate (315) 503-7248 →Call (315) 503-7248 or email info@roofnexany.com and we will schedule a free inspection at your property. We answer the phone 24/7 for emergencies, and standard estimates are booked within two business days. Tell us your address and what you are seeing, and we will tell you what it takes to fix it.