Asphalt shingle roof installation, repair, and replacement across New York

Shingle Roofing in New York Built for Snow and Storms

Shingle Roofing in New York is what we do year-round, from Rochester to Long Island. Whether you need a full asphalt shingle roof replacement in New York or a fast fix for curling shingles after a nor'easter, our crews handle GAF, Owens Corning, and CertainTeed systems. We pull permits, tear off clean, and leave a roof that sheds ice and rain for decades.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

Call Now (315) 503-7248 → No spam. No obligation. Just practical help.
Experienced roofing professionals at work
Careful work. Honest options.
About this service

What Shingle Roofing in New York Involves

Shingle Roofing in New York is the installation, repair, or replacement of asphalt shingle roof systems on pitched residential and light-commercial roofs. A complete system includes roofing felt or synthetic underlayment, ice and water shield along eaves and valleys, roof flashing at chimneys and walls, ridge vents for attic airflow, and architectural shingles nailed with a roofing nail gun to manufacturer spec. We strip the old roof, inspect the deck, replace rotten sheathing, and hand-seal every ridge cap.

New York shingle roofing takes a beating. Lake-effect snow off Rochester and Buffalo, coastal wind on Long Island, and freeze-thaw cycles in the Hudson Valley all work shingles loose. Missing shingles and flashing failure let water into the attic, where it soaks insulation and grows mold. If you have spotted curling shingles or granules in the gutter, call us before the next storm turns a $900 repair into a $12,000 tear-off. We serve homeowners, landlords, and property managers statewide.

  • ✓ Built for Snow Loads
  • ✓ Fast Storm Response
  • ✓ 25 to 50 Year Lifespans
  • ✓ Curb Appeal That Sells
What's included

What Our Shingle Roofing Includes

Every full shingle roof we install includes tear-off, deck inspection, underlayment, ice and water shield, flashing, ridge vents, and cleanup. Repairs include matching shingles and sealing. Here is what is standard on every job.

✓

Full Tear-Off and Disposal

We strip the old roof to the deck, haul away every bundle and nail in a dumpster, and sweep the property with magnets. No layering new shingles over old ones, which traps heat and voids most manufacturer warranties.

✓

Ice and Water Shield

We install self-adhering ice and water shield along eaves, valleys, and around penetrations. This membrane is what stops ice dams from backing water under the shingles during a January thaw, and it is required by code in many New York jurisdictions.

✓

Synthetic Underlayment

We roll synthetic underlayment across the field of the roof before shingles go down. It sheds water that gets past a lifted shingle and gives the roof a secondary barrier against wind-driven rain.

✓

New Flashing and Drip Edge

Chimney, wall, and valley flashing get replaced with new metal, and drip edge goes on every eave and rake. Old flashing is the number one cause of leaks on roofs that otherwise look fine.

✓

Ridge Vents and Intake

We cut in ridge vents sized to your attic square footage and confirm intake vents at the soffits. Balanced ventilation keeps attic temperatures down and prevents the condensation that rots decking from below.

✓

Magnetic Cleanup and Final Walk

We magnet-sweep the lawn, driveway, and flower beds twice, then walk the roof with you to show the finished work. You get warranty paperwork and our contact number before we pull out of the driveway.

How it works

How Our Shingle Roofing Process Works

01

Inspection and Estimate

We walk the roof, check the attic for daylight and condensation, and photograph every problem area. You get a line-item estimate within 24 hours showing tear-off, underlayment, flashing, and shingle line by name. No pressure, no same-day-sign discount games.

02

Permits and Materials

We file the building permit and order materials from the manufacturer. Bundles, ice and water shield, drip edge, and ridge vent arrive the day before tear-off so nothing sits on your lawn overnight. You get the color confirmation in writing.

03

Tear-Off and Deck Repair

The crew strips the old roof to the deck, hauls it away in a dumpster, and replaces any soft or delaminated sheathing. We re-nail loose boards and check the chimney and wall flashing while the roof is open. Most tear-offs take one to two days.

04

Installation

Underlayment goes down first, then ice and water shield at eaves and valleys, then shingles nailed to the manufacturer's pattern with a roofing nail gun. We cut ridge caps by hand and seal them with roofing cement. A typical 2,000-square-foot roof takes two to three days.

05

Cleanup and Final Walk

We magnet-sweep the lawn and driveway for roofing nails, then walk the roof with you to show the finished work. You get the manufacturer warranty paperwork and our workmanship warranty the same day. Final payment is due after you sign off.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Roofing nail gun

Drives shingle nails to the exact depth and pattern the manufacturer requires. Hand-nailing is slower and inconsistent, and improper depth voids warranties.

Shingle remover and pry bar

Strips old shingles and underlayment without gouging the deck. We use flat bars at flashing and valleys to avoid damaging metal we plan to reuse.

Chalk line and roofing hammer

Chalk lines keep course spacing straight across the roof; hammers set ridge caps and hand-seal tabs in tight spots where the nail gun will not fit.

Safety harness and roofing ladder

OSHA-compliant fall protection on every pitched roof. We anchor harnesses at the ridge and use ladder stabilizers to protect gutters.

Caulking gun and utility knife

Seals flashing, pipe boots, and ridge caps with polyurethane caulk. Knives trim underlayment and shingles cleanly at valleys and walls.

Power drill

Fastens drip edge, vents, and flashing. We use cordless drills with magnetic bit holders so screws do not end up in your lawn.

Real results

Before and after.

Rochester Ice Dam Tear-Off

Before

A 1,800-square-foot ranch in Rochester had three layers of shingles, no ice and water shield, and active leaks into two bedrooms. The deck was rotted along the entire north eave from years of ice damming.

After

We stripped all three layers, replaced 14 sheets of sheathing, and installed GAF Timberline HDZ with full ice and water shield coverage. The attic now holds 55F in summer instead of 140F, and the leaks stopped completely.

Valley Stream Storm Repair

Before

A nor'easter tore 40 shingles off the ridge and hip of a colonial in Valley Stream. Rain was entering the attic through the exposed underlayment, and the homeowner had a bucket in the hallway.

After

We tarped the same day, matched the existing CertainTeed Landmark shingles, and replaced the damaged ridge caps and hip shingles within 48 hours. The repair passed a hose test with no leaks.

Endicott Full Replacement

Before

A 2,400-square-foot two-story in Endicott had 22-year-old three-tab shingles with widespread curling, granule loss, and two failed pipe boots. The homeowner was patching leaks every spring.

After

We installed Owens Corning Duration shingles with synthetic underlayment, new flashing, and a ridge vent sized for the attic. The roof went from 22 years old to a 50-year warranty system, and the attic temperature dropped 30 degrees.

Problems we solve

Shingle Roof Problems We Solve in New York

Most shingle roof failures in New York start small: a lifted shingle, a cracked flashing boot, a clogged valley. Left alone through one winter, they turn into ceiling stains and rotten decking. Here is what we fix.

Ask a pro →
01

Missing or torn shingles after wind storms

We tarp the same day, then replace missing shingles with matching stock and re-nail surrounding courses. We check the ridge and hips for additional damage and reseal any lifted tabs before we leave.

↗
02

Curling and buckling shingles

We inspect attic ventilation first, because poor airflow cooks shingles from below. If the roof is past saving, we quote a full replacement. If it is isolated, we replace the affected courses and add intake or ridge venting.

↗
03

Ice dams and water backing under shingles

We install ice and water shield at eaves and valleys, seal air leaks into the attic, and verify insulation depth. That combination stops the freeze-thaw cycle that builds dams in the first place.

↗
04

Flashing failure at chimneys and walls

We replace step flashing, counter-flashing, and chimney aprons with new metal, then seal with polyurethane caulk rated for freeze-thaw. We test with a hose before closing up the repair.

↗
Proof you can check

Licensed, Certified, and Reviewed

✓
GAF Master Elite ContractorGAF
✓
Owens Corning Preferred ContractorOwens Corning
✓
CertainTeed SELECT ShingleMasterCertainTeed
✓
New York State licensed home improvement contractorNew York State
✓
NRCA membershipNational Roofing Contractors Association
Customer reviews

What New York Homeowners Say

★★★★★
“Ice dam tore up our back roof in February and we had water in the kitchen ceiling. Roofnexa tarped it the same day and had new shingles on within a week. They matched the old color perfectly and cleaned every nail out of the lawn. Twelve years in business shows.”
DR

Dave R.Homeowner, Rochester

✓ Verified
★★★★★
“I manage four rentals and needed shingle repair on two of them fast. Roofnexa fixed curling shingles and flashing on both within a week and sent photos of everything. Fair pricing, no upsell, and they warranty the work. They are my go-to now.”
JL

James L.Landlord, Endicott

✓ Verified
Good questions

Frequently Asked Questions

(315) 503-7248 →

Most asphalt shingle roof replacements in New York run $9,500 to $22,000 in 2026, depending on roof size, pitch, layers to tear off, and shingle line. A basic repair like replacing missing shingles or resealing flashing runs $350 to $1,200. Steep pitches, multiple dormers, and chimney flashing add labor. We give you a line-item estimate in 24 hours.

Architectural asphalt shingles last 25 to 30 years in New York; premium lines from GAF, Owens Corning, and Malarkey reach 40 to 50 years. Our freeze-thaw cycles and summer attic heat shorten lifespan if ventilation is poor. A roof with ice and water shield at the eaves and proper ridge vents will hit the top of that range.

Architectural asphalt shingles with a 130-mph wind rating and Class 4 impact rating handle New York snow, ice, and hail best. We install GAF Timberline, Owens Corning Duration, and CertainTeed Landmark systems with ice and water shield at eaves and valleys. That combination resists ice dams, wind uplift, and granule loss better than standard 3-tab.

Roofnexa NY repairs shingle roofs across New York, from Rochester to Long Island. We fix missing shingles, curling shingles, flashing failure, and storm damage with matching materials. Same-day tarping is available after storms, and permanent repairs start within 48 hours. Call (315) 503-7248 for a free inspection.

Where we deliver this service

Cities We Serve for Shingle Roofing

Roofnexa NY delivers shingle roofing across New York State, from the Great Lakes to the Atlantic. We work in lake-effect snow belts, coastal wind zones, and the freeze-thaw corridor through the Hudson Valley. Whether you need a full asphalt shingle roof replacement in New York or a quick repair after a storm, we dispatch crews from regional hubs so you get same-week service.

RochesterLake-effect snow drives our Rochester work. We install heavy ice and water shield coverage and check attic insulation before quoting any roof in the snow belt.View area →Mount VernonMount Vernon's older housing stock often has multiple shingle layers. We tear off to the deck, replace rotten sheathing, and install new architectural shingles with full flashing.View area →Valley StreamValley Stream sits in a coastal wind zone, so we use six-nail patterns and enhanced starter courses. Storm repairs get tarped the same day and fixed within 48 hours.View area →Spring ValleySpring Valley roofs deal with freeze-thaw cycles that crack flashing sealant. We use polyurethane caulk rated for temperature swings and inspect valleys on every job.View area →MiddletownMiddletown's mix of capes and colonials needs balanced attic ventilation. We size ridge vents to attic square footage to keep summer heat from cooking shingles.View area →HolbrookHolbrook's ranch and split-level homes often need full tear-offs after 20 years. We install GAF and Owens Corning systems with ice and water shield at every eave.View area →CopiagueCopiague's coastal proximity means wind-driven rain. We seal pipe boots and flashing with polyurethane and use six nails per shingle in exposed areas.View area →West HempsteadWest Hempstead's older colonials often have failing flashing at chimneys. We replace step flashing and counter-flashing with new metal and test with a hose.View area →HoltsvilleHoltsville roofs take summer heat and winter wind. We install ridge vents and synthetic underlayment to extend shingle life and prevent attic condensation.View area →Port WashingtonPort Washington's waterfront homes face salt air corrosion. We check fasteners and flashing for rust and spec materials rated for coastal exposure.View area →Floral ParkFloral Park's tree-lined streets mean shade and moss growth. We clean granules from gutters and treat moss before installing new shingles.View area →GreenlawnGreenlawn's mix of ranches and capes gets full tear-offs and repairs. We match existing shingle colors and replace damaged ridge caps by hand.View area →South FarmingdaleSouth Farmingdale's split-levels often need ridge vent upgrades. We cut in new vents and confirm soffit intake to balance airflow.View area →EndicottEndicott's wet snow and summer humidity drive attic condensation. We check insulation and add ridge vents to keep decking dry from below.View area →InwoodInwood's coastal exposure means wind uplift. We use six-nail patterns and enhanced starter courses to meet wind warranty requirements.View area →
Ready when you are

Get Your Shingle Roofing in New York Quote

Call (315) 503-7248 for a free inspection and a line-item estimate within 24 hours. We are a New York State licensed home improvement contractor with GAF Master Elite credentials. Same-day tarping after storms.

Get Free Estimate (315) 503-7248 →
Request an appointment

Get Your Free Roofing Estimate

Call (315) 503-7248 or email info@roofnexany.com and we will schedule a free inspection at your property. We answer the phone 24/7 for emergencies, and standard estimates are booked within two business days. Tell us your address and what you are seeing, and we will tell you what it takes to fix it.

Tap to call(315) 503-7248